|
 |
 |
 |
|
|
Experience the productivity only PowerTrak can
give you:
• 3.64 cubic yard hopper
• 21 second cycle time
• Payloads up to 1,300 lbs. per cubic yard.
• Reinforced hopper lip
• All high tensile steel construction.
• 150,000 psi minimum yield steel in areas of the
tailgate subject to high wear and stress.
• High angle cylinder mount for more payload
forward in the body.
• High pressure hydraulics.
• Low profile DPF body for better center of gravity
and clearance from obstructions.
• Fully welded Interlaced subfloor.
• Raised ejector tracks with aluminum/bronze alloy
cast slide shoe bearings.
|
|
|
 |
|
 | The Heil PowerTrak Commercial rear loader is the latest design in the evolution of the rear loader
packer, an evolution that started when Heil invented the Colecto-Pak almost 60 years ago. The new
PowerTrak will deliver bigger payloads than you ever thought possible, while maintaining the critical
weight advantages that come from Heil’s high tensile steel construction.
The heart of the PowerTrak is its patented dual track system. Other rear
loaders move shoes or rollers along a single track during sweep and pack
cycles. This requires the top cylinder to operate at a sharp angle of
resistance, causing intense friction which robs power and speed and
increases wear on shoes and tracks. PowerTrak's revolutionary dual track
system gives the top cylinder its own track, significantly reducing the
angle of resistance. As a result, friction is reduced, cycle times are
faster, more pressure is exerted directly into the load, and trailgate shoes
wear less.
The PowerTrak will tackle your toughest
commercial routes without a whimper. Its
cavernous 3.64 cubic yard hopper will feast
on refuse that would choke most other rear
loaders – construction and demolition debris,
10-yard containers, and anything else you
want to feed it. The PowerTrak tailgate is made of all high tensile steel, saving critical
weight that allows you to handles those extra big payloads you’ll get. And with its high
angle cylinder mount, the ejector panel retracts farther in the body than other rear
loaders, putting more of that payload forward for better weight distribution.
The PowerTrak also features the DuraPack® Family body, the toughest we make. Its fully welded
subframe, flat floor and stylish curved body side can withstand the harshest environments and still
look good years down the road.
With PowerTrak you’ll get more packing punch, faster cycle times, and incredible payloads,
cutting precious time off your work day and reducing long term maintenance costs at the same time.
The PowerTrak can also be equipped with cart tippers for residential service.
See the PowerTrak’s featured highlights below, or click here
for a complete Product Tour of features and benefits.
Sizes Available: 25, 27, and 32 Cubic yards.
Patented Dual Track System
|
|
• Offset upper track operates at softer angle, reducing friction.
• Less friction means more force is directed into the load.
• PowerTrak can use smaller cylinders for packing because of less friction.
• Smaller cylinders generate much faster cycle times.
• Smaller cylinders also reduce weight in the tailgate.
• Less friction reduces wear in the tailgate shoes and tracks, reducing
maintenance costs.
|
More Payload Forward In the Body
- High angle mount of ejector cylinder allows panel to retract farther in the body,
allowing more payload forward for bigger payloads and better weight distribution.
- Packing forces move upward in the body, saving wear on floor and tracks.
- Ejector panel does not contact tailgate.
Raised Ejector Track System
- Similar to the Heil front loader design, raised
tracks provide a tight fit for the ejector assembly,
with less chance for trash to build up behind
ejector panel.
- Aluminum/bronze cast alloy shoes.
- Ejector shoes are easily replaced without
removing the ejector panel.
- Shoes are reversible for double the life of
ordinary shoes.
Easy To Service
- Oversized cast alloy tailgate shoes provide long wear.
- Easily accessible through panel in rear bolster.
Interlaced Subframe
|
|
• Heil’s interlaced subframe is made from formed
channels for extra strength.
• Fully Welded, for superior resistance to corrosion
and cracking.
• Flat floor made from abrasion resistant steel for
longer wear. No trough to clean out from trash
buildup.
| Technical Specifications
Detailed technical specifications in Adobe Acrobat PDF Format are available
here.
Additional Information
Additional technical information on this product is available to
registered users. Please register to obtain technical
specification, service manuals etc.
|
